SPECIFICATIONS FOR MODEL 2000C OPEN AND CLOSE
AUTOMATIC CONTROL FOR TON CYLINDER VALVES
| Click here to download Specifications sheet in PDF format |
OPERATION
The
Model 2000C is an actuator system to automatically open and close the
valve on chlorine or sulfur dioxide ton cylinders.
The system includes a battery operated actuator with electric motor that rotates the valve stem toward open or closed position for alignment, tests, and remote operation. The actuator is designed to mount without interfering with or requiring yokes or additional adaptors for dispensers or discharging hardware. The motor, gears, and controls are assembled as one unit.
CAPABILITIES
- Battery operated with trickle charger
- Optional integral leak detection for automatic shutdown
- Remote control by leak detector, panic button, or other digital signals such as PLC or computer
- Easy to install or remove
- Can be used on chlorine and sulfur dioxide containers
- Can be part of an automatic changeover system to permit only one container in service at a time
- Eliminates the need for scrubbers in certain applications per the Uniform Fire Code
FEATURES
The system includes a remote power supply enclosure for trickle charge of the batteries. Placement of the actuator can be accomplished by connection to the cylinder valve with an easy on/off latch. Monitor and controls are accomplished through an on-board microprocessor with integral LED displays for CLOSED, ALIGN, and OPEN. The LED display enables the operator to easily read the condition when mounted outdoors with bright sunlight. Programming is accomplished through an integral keypad. Valve position is transmitted to the microprocessor from a direct-coupled potentiometer and displayed in Degrees Open.
ADDITIONAL INFO
Inputs for remote control can include "open", "close", and "latch close". Outputs for remote indication can include "valve open", "valve closed", "leak", or "fail".
For information on actuators that open and close 150-pound cylinders refer to Specification Model U.
DETAILS
40 ft/pounds for safety close
MODEL NUMBER ITEMS AND OPTIONS |
|||||
| A | B | C | D | E | F |
| Model 2000C | - | - | - | - | - |
ITEM |
OPTION |
DESCRIPTION |
| A STANDARDEQUIPMENT |
2000 | Base price includes actuator with hardware to mount on ton cylinder, manual open and close, LED display for indication of closed, open, align, failed, and latched closed. |
| B REMOTE POWER |
0 | Integral power supply and 4500 mAH battery pack, no remote power supply, weight increases by 5 pounds. |
| X | Specify number of actuators required. One remote power supply enclosure to be furnished to accommodate number of actuators. (Note 3 and Note 7) | |
| C INPUTS |
0 | Standard with terminals for contact closure input, cable entry is CGB |
| 1 | One, close receiver, RF | |
| 2 | Three, RF (Note2 and Note 5) | |
| 3 | Three, wired with quick connect/disconnect (Note 2 and Note 6) | |
| D OUTPUTS |
0 | Standard with None |
| 4 | Four, RF (Note 5) | |
| 5 | Four, wired with quick connect/disconnect (Note 6) | |
| E LEAK DETECTION |
0 | None |
| 1 | Integral leak detector with automatic close (Specify chlorine or sulfur dioxide) | |
| F REMOTE DEVICES |
0 | None |
| 1 | Remote Transmitter with Panic Button (For one common input) | |
| 2 | Remote Control, RF, with Panic Button | |
| 3 | Remote Terminal Box with PB, HWT 008, (Note 3) Per eight actuators |
| *NOTE 1 | The term "Latched Closed" represents the action of the actuator after receiving a remote contact closure. The actuator closes the valve and will not respond to other signals until an acknowledgement is made on the actuator keypad. |
| *NOTE 2 | Integral leak detector is required for remote open option |
| *NOTE 3 | Shielded cable furnished (30') and may be connected to PLC/RTU without Terminal Box |
| *NOTE 4 | Spares must be ordered separately and may include: |
| Part # LD001 - Chlorine Sensor, 100 PPM | |
| Part # LD003 - Sulfur dioxide Sensor, 100 PPM | |
| Part # BA018 - 18/10 Volt, 4500 mAH, NimH, battery pack | |
| Part # FS001 - Fuse (Package of 5) | |
| *NOTE 5 | When RF inputs and outputs are required, select C=2 and D= 4. |
| *NOTE 6 | When wired inputs and outputs are required, select C= 3 and D=5. |
| *NOTE 7 | The remote power supply enclosure includes output relay for remote alarm signal, power and alarm lights. |
| Robo-Control - JCS Industries, Inc. | Tel: (281) 353-2100 |
| P. O. Box 90028 | Fax: (281) 353-0657 |
| Houston, TX 77290 | Email: sales@JCSIndustries.us.com |
| www.robo-control.com |
 |
Ph (281) 353-2100 - E-Mail: sales@JCSIndustries.us.com PRODUCTS - Actuators - Model 2000C - Model RC - Model RC-TVR - Model U - Leak Detectors - LD 100 - Valve Cover - Remote Control Panels - Remote Pushbutton - Model 2000C Examples - Model RC Examples - Model U Examples - FAQ - INQUIRY FORM - LINKS - HOME PAGE |